Graco Reactor 3 E-XP1 Operation page 10

Warnings
SKIN INJECTION INJECTION HAZARD
SKIN SKIN INJECTION
High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin.
This may look like just a cut, but it is a serious injury that can result in amputation.
Get Get immediate Get immediate surgical immediate
• Do not spray without tip guard and trigger guard installed.
• Engage trigger lock when not spraying.
• Do not point gun at anyone or at any part of the body.
• Do not put your hand over the spray tip.
• Do not stop or deflect leaks with your hand, body, glove, or rag.
• Follow the Pressure
checking, or servicing equipment.
• Tighten all fluid connections before operating the equipment.
• Check hoses and couplings daily. Replace worn or damaged parts immediately.
FIRE AND AND EXPLOSION
FIRE FIRE AND
Flammable fumes, such as solvent and paint fumes, in work
Paint or solvent flowing through the equipment can cause static sparking. To help
prevent fire and explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps,
and plastic drop cloths (potential static sparking).
• Ground all equipment in the work area. See Grounding
• Never spray or flush solvent at high pressure.
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when
flammable fumes are present.
• Use only grounded hoses.
• Hold gun firmly to side of grounded pail when triggering into pail. Do not use pail
liners unless they are anti-static or conductive.
• Stop Stop operation Stop operation immediately operation
equipment until you identify and correct the problem.
• Keep a working fire extinguisher in the work area.
10
WARNING
WARNING WARNING
HAZARD
HAZARD
surgical treatment surgical treatment. treatment
Pressure Relief Pressure Relief Procedure Relief Procedure when you stop spraying and before cleaning, Procedure
EXPLOSION HAZARD HAZARD
EXPLOSION HAZARD
immediately immediately if static sparking occurs or you feel a shock. Do not use
work area area can ignite or explode.
work area
Grounding instructions.
Grounding
3A8500E