Lexmark Optra 1200 Setup Manual page 63

Connecting an
infrared adapter
You can use an infrared adapter to print remotely from a
computer equipped with an infrared port.
The optional tri-port adapter, which includes an infrared
port, lets you connect the infrared adapter to your printer.
After you have installed the tri-port adapter, follow the
steps below to connect the infrared adapter to your
printer:
1
Make sure the printer power is off and the power
cord is unplugged.
2
Locate the infrared port at the back of your printer.
The infrared port is attached to the tri-port adapter
you installed earlier.
3
Plug the adapter cable into the infrared port.
4
Plug in the printer power cord and turn on the
printer.
If any light on the infrared adapter comes on when
the printer power is on, the adapter is plugged into
the printer port correctly.
57
Attach cables