Lexmark Optra 1200 Setup Manual page 48

Warning!
Memory cards are
easily damaged by static elec-
tricity. Touch something metal
before you touch a card.
42
Install memory and network options
3
Complete the following steps if you need to
remove a pair of memory cards before you install
new ones. Otherwise, skip to step 4 on page 43.
a
Push the metal clips at each end of the connec-
tor away from the rightmost card.
b
Rotate the card toward the right.
c
Gently pull the card out of the connector.
d
Place the card in its original packaging.
If you did not save the packaging, wrap the card
in paper and store it in a box.
e
Repeat steps a–d to remove the second memory
card.