Lexmark Optra 1200 Setup Manual page 55

Warning!
All adapters are eas-
ily damaged by static electricity.
Touch something metal before
you touch an adapter.
To install an optional adapter:
1
Complete the steps in "Removing the system
board" on page 38.
2
Complete the following steps if you need to
remove an adapter before you install another one.
Otherwise, skip to step 3 on page 50.
a
Remove the two screws on either end of the
opening for the cable connectors.
b
Gently pull the adapter completely out of the
system board connector.
c
Angle the adapter away from the system board.
d
Place the adapter in its original packaging.
If you did not save the packaging, wrap the
adapter in paper and store it in a box.
Install memory and network options
49