Lexmark Optra 1200 Setup Manual page 22

Drum
16
Install print units
5
6
Handle
Remove the photoconductor with the same color
label as the toner cartridge from the packing mate-
rial.
To avoid damaging the photoconductor, do not
touch the glossy green surface of the drum.
Do not expose the photoconductor to light for more
than 10 minutes. If you need more time to assemble
and install the print units, cover the print units to
protect them from direct light.
Hold the photoconductor by the color-coded han-
dle and position it above the toner cartridge, as
shown.