Lexmark Optra 1200 Setup Manual page 31

A4, A5, B5, and letter size paper
Maximum stack height
Long edge
B4, A3, legal, and 11x17 size paper
Maximum stack height
Short edge
4
Corner tab
Corner tab
Load the paper with the recommended print side
face down, as shown.
Do not exceed the maximum stack height indicated
on the paper guides. Make sure the paper fits under
the two corner tabs at the front of the tray.
The orientation of the paper in the tray depends on
the size paper you're loading:
– For A4, A5, B5, and letter size paper, place the
long edge of the paper at the front of the tray.
If you're loading preprinted letterhead, place the
top of the page to the right.
– For B4, A3, legal, and 11x17 size paper, place the
short edge of the paper at the front of the tray.
If you're loading preprinted letterhead, place the
top of the page at the front of the tray.
The printer recognizes either B4 and A3 size
paper or legal and 11x17 size paper, depending
on the paper conventions in your geographic
region. If you need to change this printer setting,
refer to the information on the Size Detection
menu item in the User's Guide.
25
Load paper