Lexmark Optra 1200 Setup Manual page 20

305 mm
(12 in.)
14
Position the printer
381 mm
(15 in.)
381 mm
(15 in.)
508 mm
(20 in.)
Quick Reference
2
Place the printer on a flat, stable surface in a well–
ventilated area.
Leave enough space in front of the printer to allow
for easy paper loading. If you plan to install the rear
output bin, leave room behind the printer as well.
Do not place the printer:
– In direct sunlight
– Near heat sources or air conditioners
– In dusty or dirty environments
3
Find a convenient location for the Quick Refer-
ence:
a
Locate a visible spot in the vicinity of the
printer or on the printer itself for the Quick
Reference.
b
Remove the protective paper from the back of
the plastic sleeve.
c
Firmly attach the adhesive-backed sleeve to the
designated area.