Lexmark Optra 1200 Setup Manual page 14

Connecting the
printer to the
Lock switch (unlocked)
8
Set up optional drawers
Complete the following steps to attach the printer to one
or more optional drawers:
drawer
1
2
3
4
5
Remove the drawer from the packing materials.
Place the drawer (or the two drawers you already
connected) in the location you have chosen for
your printer.
See page 14 for more information about the appro-
priate environment for the printer.
Make sure the lock switch on the left side of the
drawer is unlocked.
Remove the connector cover from the back of the
printer.
If you're installing the optional drawer sometime
after initial printer setup, turn the printer off and
disconnect the printer cables and the power cord.