Lexmark Optra 1200 Setup Manual page 50

Clip
44
Install memory and network options
Pins
Clip
8
Make sure both metal clips on the connector are
fastened, and the two pins on each end of the con-
nector are pushed through the holes on the card.
9
Repeat steps 4–8 to install the other memory card
or cards.
10
If you have other options to install, continue with
"Installing a hard disk" on page 45 or "Installing
adapters" on page 48. Otherwise, go to "Reinstall-
ing the system board" on page 52.