Universal Audio Ampex ATR-102 Manual page 393

Table of Contents

Advertisement

+6dB, +7.5dB, or +9dB calibration levels, which can be used at their recom-
mended settings, or tweaked for additional tonal options. Input, Sync and Re-
pro paths, plus Thru (bypass) are available for authenticity, providing all
available circuit options of the A800. A huge time saver, the Studer A800
plug-in features an innovative Gang Controls setting, allowing for instant glo-
bal adjustment of any parameters for all Studer A800 instances in your ses-
sion.
Secondary controls are hidden behind the reel deck, and can be exposed by
clicking on the Studer badge or Open label of the plug-in GUI. The Equaliser
control allows the user to select between the American (NAB) and European
(CCIR) standardized EQs, providing regional pre-emphasis/de-emphasis fil-
tering at 7.5 and 15 IPS, each with its own sonic qualities — plus the AES EQ
at 30 IPS. The HF Bias calibration parameter allows the user to tune the HF os-
cillation voltage feed to the magnetic record head, striking a balance be-
tween record sensitivity and distortion. This can also be used creatively as an
effect — from warm, overbiased sounds, to voltage-starved distortion and
chatter. HF Record is a calibration filter that allows for HF makeup when the
ideal Bias leaves a high frequency deficiency; both HF Bias and HF record
are fed into the tape nonlinearity. Sync and Repro HF and LF calibration EQs
allow for adjusting for a flat playback response, or can also be used cre-
atively. All
to the manufacturer's recommended settings via the A800's Auto Cal feature,
or may be disabled. Finally, separate controls for Hiss and Hum are available
— each tuned to default settings to match the hardware behavior — with a
global noise bypass option.
Multitrack Tape
The primary purpose of Studer A800 is to obtain multichannel tape sonics
Machine
within the DAW environment. To obtain the classic multitrack tape sound, the
plug-in should be placed as the first insert on individual tracks, before other
processing is applied. Creative "non-standard" results can be obtained by
placing the Studer A800 in subsequent inserts after other processors or on
busses in a send/return configuration. Mixdown to two tracks can be emu-
lated by placing the plug-in on the stereo output bus.
UAD Powered Plug-Ins Manual
Secondary Controls (page
- 393 -
398) can be automatically calibrated
Chapter 45: Studer A800

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents