Universal Audio Ampex ATR-102 Manual page 219

The available midrange center frequencies are 360 Hz, 700 Hz, 1.6 kHz,
3.2 kHz, 4.8 kHz, 7.2 kHz, and OFF. When OFF is specified, the band is dis-
abled. UAD CPU usage is not reduced when the band is OFF.
Low Band
Low Gain
The equalization gain for the low band is selected with the inner knob of the
dual-concentric control. The available range is approximately ±15 dB.
Rotate the control clockwise to boost the selected low band frequency, or
counter-clockwise to reduce the bass response.
Low Frequency
The Low frequency is selected with the outer ring of the dual-concentric knob
controls. The ring control can be dragged with the mouse, or click directly on
the "silkscreen" text to specify a frequency or disable the Low band.
Note:
the available values, or shift + click to step back one frequency.
The available low band center frequencies are 35 Hz, 60 Hz, 110 Hz, 220
Hz, and OFF. When OFF is specified, the band is disabled. UAD CPU usage
is not reduced when OFF.
Low Cut
to cycle through the available values, or shift + click to step back one fre-
quency.
UAD Powered Plug-Ins Manual
The low frequency band is controlled by dual-concentric
knobs, delivering smooth shelving equalization.
The inner knob controls the band gain, and the outer ring
selects the frequency or band disable. These two controls
are detailed below.
You can also click the low shelf symbol above the knob to cycle through
This knob specifies the fixed frequency of the Low Cut filter.
This filter has an 18 dB per octave slope.
The available frequencies are 50 Hz, 80 Hz, 160 Hz, 300
Hz, and OFF. When OFF is specified, the low cut filter is
disabled. UAD CPU usage is not reduced when OFF.
You can also click the low cut symbol above the knob
Note:
- 219 - Chapter 23: Neve 1073 Equalizer