Universal Audio Ampex ATR-102 Manual page 380

High Frequency
(HF) Band
HF Frequency
This control determines the band frequency to be boosted or attenuated by the
band Gain setting. The available range is 1.5 kHz to 16 kHz in both Black
and Brown modes.
HF Bell
The Bell button switches the HF band from shelf mode to peak/dip mode. In
normal (shelf) mode, only frequencies above the frequency value are boosted
or attenuated. In Bell (peak/dip) mode, frequencies above and below the fre-
quency value are boosted or attenuated.
In Black mode, the HF Bell Q is 1.3 and in Brown mode the HF Bell Q is 0.8.
High-Mid
HMF Gain
Frequency
This control determines the amount by which the
(HMF) Band
frequency value for the band is boosted or atten-
uated. The available range is ±15 dB in both
Black and Brown modes.
Tip:
center position.
HMF Frequency
This control determines the HMF band center fre-
quency to be boosted or attenuated by the band
Gain setting. The available range is 0.6 kHz to 7 kHz in both Black and
Brown modes.
UAD Powered Plug-Ins Manual
Click the "0" to return the control knob to its
HF Gain
This control determines the amount by which the
frequency value for the band is boosted or at-
tenuated. The available range is ±15 dB in both
Black and Brown modes.
Tip: Click the "0" to return the Gain knob to its
center position.
- 380 - Chapter 43: SSL E Channel Strip