Universal Audio Ampex ATR-102 Manual page 105

Tranny Level
Note:
"Bypass/Tranny" on page
LF Sat LED The LF Sat (Low Frequency Saturation) LED indicates the amount of LF satura-
tion in the Tranny processor. Higher Tranny Level values increase the LF satu-
ration.
When loading presets created on the FATSO Jr. into the FATSO Sr., the pa-
FATSO Jr.
Presets
rameters that are unique to FATSO Sr. are set to their default control values.
The default values of the unique FATSO Sr. parameters are: Thresh-
old/Tranny knobs at 5, and Filter/Attack/Release buttons off.
All visual and aural references to the FATSO and all use of EMPIRICAL LABS's trademarks are being
made with written permission from EMPIRICAL LABS. Special thanks to Dave Derr for assistance
with this project.
UAD Powered Plug-Ins Manual
This control determines the amount of Tranny process-
ing (see
tailed description). Higher values make the Tranny ef-
fect more prominent. Increasing the Tranny level also
increases the signal THD (see
page
(page
This control has no effect when the Tranny processor is inactive (see
The Empirical Labs EL7 FATSO Jr. hardware unit
"The Tranny Processor" on page 95
98), and the sensitivity of the Warmth processor
99). A value of 5 is the unity setting.
100).
- 105 -
"THD Indicators" on
Chapter 8: Empirical Labs EL7 FATSO
for a de-