Troubleshooting
•
"Setup troubleshooting" on page 48
•
"Print troubleshooting" on page 51
•
"Copy troubleshooting" on page 54
•
"Scan troubleshooting" on page 55
•
"Fax troubleshooting" on page 57
•
"Jams and misfeeds troubleshooting" on page 59
•
"Error messages" on page 60
•
"Removing and reinstalling the software" on page 61
Setup troubleshooting
•
"Power button is not lit" on page 48
•
"Software does not install" on page 48
•
"Page does not print" on page 49
•
"Cannot print from digital camera using PictBridge" on page 51
Power button is not lit
1
Disconnect the power supply cord from the wall outlet, and then from the printer.
2
Plug the cord all the way into the power supply port on the printer.
3
Plug the cord into an electrical outlet that other electrical devices have been using.
4
If the
light is not on, press
Software does not install
The following operating systems are supported:
•
Windows 98/Me
•
Windows 2000
•
Windows XP
Check that your computer meets the minimum system requirements listed on the box.
.
48
2
1