Using A Pictbridge-Enabled Digital Camera To Control Printing Photos; Customizing Photos; Creating And Printing A Scrapbook Or Album Page - Lexmark X2470 User Manual

Using a PictBridge-enabled digital camera to control printing photos

Connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and print
photos.
1
Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the digital camera.
2
Insert the other end of the cable into the PictBridge port on the front of the printer.
Note: Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information,
see the camera documentation.
3
Follow the instructions in the camera documentation to select and print photos.
Note: If the printer is turned off while the camera is connected, you must disconnect and reconnect the camera.

Customizing photos

Note: For advanced photo-editing options, see "Using the Photo Editor" on page 18.

Creating and printing a scrapbook or album page

1
Load paper.
2
From the desktop, double-click the Imaging Studio icon.
3
Click Browse & Print Photos.
4
Click Show Folders.
5
Select the folder where the photos are stored.
6
Click Hide Folders.
7
From the Creative Tasks area, click Print an album page with various photo sizes.
8
Select a paper size.
9
Select a page layout.
For more options:
a
Click Change the category of layouts listed above.
b
Select a layout category.
31