Using The Print Properties Tabs; Using The Photo Editor - Lexmark X2470 User Manual

Using the Print Properties tabs

All of the print settings are on the three main tabs of the Print Properties software: Quality/Copies, Paper Setup, and
Print Layout.
Tab
Quality/Copies
Paper Setup
Print Layout
Note: For more information about these settings, right-click a setting on the screen, and then select What's This?

Using the Photo Editor

Use the Photo Editor software to edit graphics or photos.
1
Click Start Programs or All Programs Lexmark 2400 Series.
2
Select Photo Editor.
3
Click File Open to select the image you want to edit.
4
Edit the image with the available tools.
Notes:
•
You can edit only one image at a time.
•
Move the mouse pointer over the tool for a description.
•
To undo or redo changes, click the corresponding arrow next to Undo in the top center of the screen. You
can reverse multiple changes.
5
Click File Save as.
6
Enter a file name and file type, and then click Save.
From this section
Quick Fixes
Options
•
Select a Quality/Speed setting.
•
Select a Paper Type.
•
Customize how the printer prints several copies of a single print job:
collated or normal.
•
Choose Automatic Image Sharpening.
•
Choose to have the last page printed first.
•
Specify the size of paper loaded.
•
Select the orientation of the document on the printed page: portrait or
landscape.
•
Select the layout you want to print.
•
Choose to print on both sides of the paper, and select a duplexing
preference.
You can
•
Remove the red-eye effect caused by light reflection.
•
Fix the photo with one click.
•
Colorize the image using antiquing or sepia tones.
•
Crop the image.
•
Rotate the image.
•
Flip the image.
18