Print Troubleshooting - Lexmark Pro700 Series User Manual

1
Open the ADF door, and then gently pull out the jammed paper.
Note: Be careful not to tear the paper while removing it.
2
Close the ADF door.
3
Touch DONE or press
4
From your computer, resume the print job.
Paper or specialty media misfeeds
These are possible solutions if paper or specialty media misfeeds or skews, or if multiple sheets feed or stick together.
Try one or more of the following:
C
HECK PAPER CONDITION
Use only new, unwrinkled paper.
C
HECK PAPER LOADING
•
Load a smaller amount of paper into the printer.
• Load paper with the print side facedown. (If you are not sure which side is the printable side, see the instructions
that came with the paper.)
•
Check the loading instructions for your paper or specialty media.
R
EMOVE EACH PAGE AS IT IS PRINTED
A
DJUST THE PAPER GUIDES TO FIT THE LOADED PAPER

Print troubleshooting

• "Poor quality at the edges of the page" on page 138
•
"Streaks or lines on printed image" on page 139
, depending on your printer model.
Troubleshooting
137