Incorrect Language Appears On The Display - Lexmark Pro700 Series User Manual

• "Print job does not print or is missing pages" on page 131
• "Printer is printing blank pages" on page 133
• "Printer is busy or does not respond" on page 133
•
"Cannot delete documents from the print queue" on page 134
•
"Cannot print through USB" on page 134

Incorrect language appears on the display

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
C
HANGE THE LANGUAGE USING THE PRINTER MENUS
1
From the printer control panel, press
2
Press the arrow buttons to scroll to Defaults, and then press
3
Press the arrow buttons to scroll to Set Defaults, and then press
4
Press the arrow buttons to scroll to Use Factory, and then press
5
Complete the initial printer setup.
C
HANGE THE LANGUAGE USING A BUTTON COMBINATION
1
Turn the printer off.
Note: If you have set the Power Saver timeout in the Setup menu, then press and hold
off the printer.
2
Press and hold down
Note: Do not release
has been reset.
3
Complete the initial printer setup.
Printhead errors
If the "Before you troubleshoot" checklist does not solve the problem, then try the following:
.
and , and then press and release
and until Language Selection appears on the display, indicating that the printer
Troubleshooting
.
.
.
(
IF YOU CANNOT READ THE CURRENT LANGUAGE
to turn the printer on.
129
)
for three seconds to turn