E.
Basic Definitions
•
Ballscrew - mechanism that controls the linear travel of the tool
•
Blind Rivet - a category of rivet that is completely installed from one side of the joint
•
Distance - measured in millimeters (mm)
•
Force – measured in kilonewtons (kN)
•
Grip Force – the force that the tool must see during Rivet Seek to indicate the presence of a rivet
•
Homing – zeroing of the ballscrew linear travel location, required at every tool startup (inactivity or battery replacement)
•
Jaws – machined three-piece tool set that grips the appropriately sized mandrel
•
Mandrel – the stem of the blind rivet that performs the swaging of the rivet body
•
Mandrel collector – cup on the back of the tool that collects the broken mandrel stems, required to be emptied periodically
•
Overtravel – when the linear travel of the ballscrew is exceeded
•
Rivet Body – portion of the blind rivet that swages against the rear sheet
•
Rivet Head – portion of the blind rivet exposed after mandrel break
•
Rivet Seek – pulls in the Jaws the specified distance, and within that distance the set Grip Force value must be exceeded
•
Snug Force – the force at which point the tool begins to monitor the distance traveled
•
Speed – measured in millimeters per second (mm/s)
F.
Rivet versus Thread Terms
G.
Vacuum Kit
26K100100 - BR12 Vacuum MSC Adaptor Kit
Instruction Manual
1. 1/4" Vacuum Hose Size
2. 3/16" Vacuum Hose Size (option)
3. 5/16" Vacuum Hose Size (option)
Index
61