Table of Contents
Advertisement
J.
Accessory Hazards
ACCESSORY HAZARD
To Avoid Injury:
•
Disconnect the rivet setter from the power supply (battery pack) before changing accessories.
•
Do not touch accessories during operation, as this increases the risk of cuts, pinches, or vibration injuries.
•
Use only sizes and types of accessories and consumables that are recommended elsewhere in this instruction manual.
K. Workplace Hazards
WORKPLACE HAZARD
To Avoid Injury:
•
Slips, trips and falls are major causes of workplace injury. Be aware of slippery surfaces caused by the use of the rivet setter.
•
Proceed with care in unfamiliar surroundings. Hidden hazards, such as electricity or other utility lines, can exist.
•
The rivet setter is not intended for use in potentially explosive atmospheres and is not insulated against coming into contact
with electric power.
•
Make sure there are no electrical cables, gas pipes, etc., that can cause a hazard if damaged by use of the rivet setter.
Instruction Manual
WARNING
WARNING
Introduction
21
Advertisement
Table of Contents
