Stanley BR Series Instruction Manual page 39

B. Ready Light Matrix
The blue ready lights [1], [2] will illuminate when the tool is ready to run. Only one ready light may be illuminated at a time.
FUNCTION
Tool enabled and ready in assembly mode
Tool powered on but requires Homing
Tool is in pairing mode
Tool disabled
C. PM Light Matrix
The orange Preventive Maintenance (PM) light [7] when illuminated indicates a tool fault, a controller warning, when the PM
Threshold has been exceeded by the PM counter, or if the tool has lost connection to a controller. The light will indicate the first
priority event only, even if a second or third priority event is active. Second priority event will indicate if there is no first priority
event active. Third priority event will indicate if there are no first or second priority events active.
FUNCTION
Tool Fault or Warning; first priority
Tool radio disconnected from controller; second priority
PM Threshold exceeded; third priority
None of the above
D. Indicator Light Matrix
The MFB can be assigned to select Jobs or Tasks. It can only select Job/Task 1 or Job/Task 2 since it is a binary switch. These
lights [4] indicate the selected Job or Task. If a controller input selects a Job or Task greater than 2 the lights will extinguish.
FUNCTION
Job 1 or Task 1 selected
Job 2 or Task 2 selected
Some other Job or Task besides 1 or 2 is selected
Instruction Manual
LIGHTS
Solid
Solid
Alternate blinking
None
LIGHTS
Fast Flash
Slow flash
Solid
None
LIGHTS
Solid
Solid
None
Tool Operation
PATTERN
PATTERN
PATTERN
39