Industry Canada Notice (Canada); Ce Notice (Europe); Eu Directive 2006/42/Ec (Europe) - Stanley BR Series Instruction Manual

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two con-
ditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence (s). Son utilisation est soumise à Les
deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences et (2) cet appareil doit accepter Toute
interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif.
This device complies with Health Canada's Safety Code 6 / IC RSS-210. The installer of this device should ensure that RF
radiation is not emitted in excess of the Health Canada's requirement. Information can be obtained at: http://www.hc-sc.
gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct-eng.php
Cet appareil est conforme avec Santé Canada Code de sécurité 6 / IC RSS-210. Le programme d'installation de cet appareil
doit s'assurer que les rayonnements RF n'est pas émis au-delà de l'exigence de Santé Canada. Les informations peuvent
étre obtenues: http://www.hc-sc. gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct-eng.php
This device contains transmitter module IC: 4523A-SN8200
1.7

CE Notice (Europe)

STANLEY Assembly Technologies is working toward obtaining CE Declaration for the BR-Series Cordless Tool.
1.8

EU Directive 2006/42/EC (Europe)

STANLEY Assembly Technologies is in compliance with the EU Directive 2006/42/EC (Machinery Directive) requirement that
machinery and tools must be secured so users are not endangered. The BR12PP-8 meets this requirement by employing the
following functions:
• FORCE SWITCH - The force switch ensures that a blind rivet can only be processed if a pressure is being
applied to the force switch. This prevent unintentional triggering. Additionally, the force switch assists with making sure
that the tool is indeed on the job.
*Note - The force switch can be disabled via the controller or Alpha Toolbox software interfaces.*
• MCS SWITCH - The mandrel collection system (MCS) switch ensures that the tool will not function if the
mandrel collection cup or vacuum collection connection are not installed properly. This assists in preventing a rivet from
being ejected from the tool.
10
Cordless Tool