Resetting The Cpu To Factory Settings - Siemens SIMATIC ET 200pro Operating Instructions Manual

Procedure online via the SIMATIC Automation Tool
The procedure is described in the SIMATIC Automation Tool
(https://support.industry.siemens.com/cs/de/en/view/98161300) manual (included in the
SIMATIC Automation Tool).
Reference
You can find additional information on the procedure in the STEP 7 online help.
9.2

Resetting the CPU to factory settings

Introduction
"Reset to factory settings" restores the CPU to its delivery state. The function deletes all
information that was stored internally on the CPU.
Recommendation:
Switch the CPU to its as-delivered condition if
● You want to remove a CPU and use it elsewhere with a different program.
● You want to store the CPU.
When resetting to factory settings, remember that the IP address parameters are also
deleted.
Options for resetting a CPU to factory settings
You can reset the CPU to its as-delivered condition by:
● Using the mode selector
● Using STEP 7
● Using the SIMATIC Automation Tool
Required tool (only for procedure using the mode switch)
Cross-tip screwdriver, size 2
CPU 1516pro-2 PN (6ES7516-2PN00-0AB0)
Operating Instructions, 11/2019, A5E35873416-AC
9.2 Resetting the CPU to factory settings
Maintenance
101