4. Connect the "Get_IM_Data" instruction as follows:
Figure 8-7
5. Call the "Get_IM_Data" instruction in the user program.
Result
The "Get_IM_Data" instruction has stored the I&M 0 data in the data block.
You can view the I&M0 data online in STEP 7, for example with the "Monitor all" button in the
data block. The CPU in the example is a CPU 1516pro-2 PN (6ES7516-2PN00-0AB0) with
the firmware version V2.8.
Figure 8-8
CPU 1516pro-2 PN (6ES7516-2PN00-0AB0)
Operating Instructions, 11/2019, A5E35873416-AC
Example: Calling the "Get_IM_Data" instruction
Example: I&M0 data of a CPU 1516pro-2 PN
8.7 Identification and maintenance data
Commissioning
95