Ford TRANSIT 2022 Owner's Manual page 442

WARNING: Make sure there is no
grease or oil on the threads or the
surface between the wheel lugs and
nuts. This can cause the lug nuts to
loosen while driving.
WARNING: Make sure there is no
grease or oil on the threads or the
surface between the wheel lugs and
nuts. This can cause the lug nuts to
loosen while driving.
WARNING: When you install a
wheel, remove any corrosion, dirt or
foreign materials present on the
mounting surfaces of the wheel or the
surface of the wheel hub, brake drum or
brake disc that contacts the wheel. Make
sure to secure any fasteners that attach
the rotor to the hub so they do not
interfere with the mounting surfaces of
the wheel. Installing wheels without
following these steps can cause the
wheel nuts to loosen and the wheel to
come off while your vehicle is in motion,
resulting in loss of vehicle control,
personal injury or death.
WARNING: Have the lug nuts
checked for tightness and the tire
pressure checked as soon as possible.
1. Install the wheel.
2022 Transit (TTH) Canada/United States of America, NK3J 19A321 AA enUSA, Edition date: 202107, First-Printing
Changing a Road Wheel
439
3
5
3
5
E70961
2. Install all of the lug nuts and partially
tighten them in the sequence shown.
3. Lower your vehicle and remove the
vehicle jack.
4. Fully tighten all of the lug nuts in the
sequence shown. See Locating the
Tire label (page 411).
5. Install the wheel trim.
Note: Make sure that the lug nuts are fully
seated against the wheel.
Note: Alloy wheel lug nuts are suitable for
use on a steel spare wheel.
Note: If the spare wheel is not the same
type and size as your vehicle road wheel
replace it as soon as possible.
1
4
2
1
6
4
2