Blind Spot Information System Requirements; Switching Blind Spot Information System On And Off; Locating The Blind Spot Information System Sensors - Ford TRANSIT 2022 Owner's Manual

Blind Spot Information System
BLIND SPOT INFORMATION
SYSTEM REQUIREMENTS
The system turns on when all of the
following occur:
• You start your vehicle.
• You shift into drive (D).
• The vehicle speed is greater than
6 mph (10 km/h).
Note: The system does not operate in park
(P) or reverse (R).
SWITCHING BLIND SPOT
INFORMATION SYSTEM ON
AND OFF
1. Using the instrument cluster display
controls on the steering wheel, select
Settings.
2. Select Driver Assistance.
3. Switch Blind Spot on or off.
If you switch the system off, a warning
lamp illuminates and a message displays.
When you switch the system on or off, the
alert indicators flash twice.
Note: The system remembers the last
setting when you start your vehicle.
To permanently switch the system off,
contact an authorized dealer.
2022 Transit (TTH) Canada/United States of America, NK3J 19A321 AA enUSA, Edition date: 202107, First-Printing
LOCATING THE BLIND SPOT
INFORMATION SYSTEM
SENSORS
E205199
The sensors are behind the rear bumper
on both sides of your vehicle.
Note: Keep the sensors free from snow, ice
and large accumulations of dirt.
Note: Do not cover the sensors with bumper
stickers, repair compound or other objects.
Note: Blocked sensors could affect system
performance.
If the sensors are blocked, a message may
appear in the instrument cluster display.
The alert indicators remain illuminated but
the system does not alert you.
305