Checking The Wiper Blades; Replacing The Front Wiper Blades; Washers - Ford TRANSIT 2022 Owner's Manual

Note: Keep the outside of the windshield
clean. The rain sensor is very sensitive and
the wipers may operate if dirt, mist or
insects hit the windshield.
CHECKING THE WIPER
BLADES
E142463
Run the tip of your fingers over the edge of
the blade to check for roughness.
REPLACING THE FRONT
WIPER BLADES
E72899
1. Lift the wiper arm. Press the wiper
blade locking button.
Note: Do not hold the wiper blade when
lifting the wiper arm.
2. Remove the wiper blade
Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
3. To install, reverse the removal
procedure.
2022 Transit (TTH) Canada/United States of America, NK3J 19A321 AA enUSA, Edition date: 202107, First-Printing
Wipers and Washers
Note: Make sure that the wiper blade locks
into place.

WASHERS

WASHER PRECAUTIONS
Do not operate the washers when the
washer reservoir is empty. This could cause
the washer pump to overheat.
USING THE WINDSHIELD WASHER
Pull the lever toward you to operate the
windshield washer.
Note: A courtesy wipe occurs a short time
after the wipers stop to clear any remaining
washer fluid when switched on. See
Switching the Courtesy Wipe On and Off
(page 112).
SWITCHING THE COURTESY WIPE
ON AND OFF
1.
2. Select Vehicle Settings.
3. Select Wipers.
4. Switch Courtesy Wipe on or off.
112
E197528
Using the instrument cluster display
controls on the steering wheel, select
Settings.