Ford TRANSIT 2022 Owner's Manual page 186

Starting and Stopping the Engine
E321258
2. Press the push button ignition switch.
Note: The engine may continue cranking
for up to 15 seconds or until it starts.
Note: The engine takes longer to start at
lower temperatures. It may crank for several
seconds when very cold.
RESTARTING THE ENGINE AFTER
STOPPING IT
The system allows you to start the engine
within 10 seconds of switching it off, even
if it does not detect a valid passive key.
Within 10 seconds of switching the engine
off, fully press the brake or clutch pedal
and press the push button ignition switch.
After 10 seconds, you can no longer start
the engine if the system does not detect a
valid passive key.
When you start the engine, it remains
running until you press the push button
ignition switch, even if your vehicle does
not detect a valid passive key. If you open
and close a door when the engine is
running, the system searches for a valid
passive key.
STARTING A FLOODED ENGINE -
VEHICLES WITH: KEYED IGNITION
If you cannot start the engine after 3
attempts, wait 10 seconds and do the
following:
1. Fully press the brake pedal or the
clutch pedal.
Note: Make sure that the parking brake is
applied.
2022 Transit (TTH) Canada/United States of America, NK3J 19A321 AA enUSA, Edition date: 202107, First-Printing
Note: Make sure that the transmission is in
park (P) or neutral (N).
2. Fully press the accelerator pedal and
hold it there.
E322354
3. Turn the key to position III and wait
until the engine stops cranking.
4. Release the accelerator pedal.
5. Turn the key to position III.
STARTING A FLOODED ENGINE -
VEHICLES WITH: PUSH BUTTON
START
If you cannot start the engine after 3
attempts, wait 10 seconds and do the
following:
1. Fully press the brake pedal or the
clutch pedal.
Note: Make sure that the parking brake is
applied.
Note: Make sure that the transmission is in
park (P) or neutral (N).
2. Fully press the accelerator pedal and
hold it there.
3. Press the push button ignition switch.
Note: The engine cranks for a short period
of time and then it stops.
4. Release the accelerator pedal.
E321258
5. Press the push button ignition switch.
183