Registering And Storing Menu Settings - Sony DVW-A510 Operation Manual

4-1 Registering and Storing Menu Settings

The operating conditions of the VTR are set by the
menu operation section on the lower control panel.
Menu items are divided among six different menus
(HOME, TC, CUE, PF1, PF2, SET UP).
Of these menus, the PF1/PF2 (Personal Function)
menus can be used to register frequently used menu
items from the other menus, allowing faster setting of
VTR operating conditions. Eight VTR memory banks
are provided for storing up to eight sets of menu
settings. The contents of the eight VTR memory
banks can, in turn, be stored on an IC memory card for
later recall.
4-1-1 Menu Configuration
In addition to the six main menus, the VTR has two
supplementary menus containing items not contained
in the main menus.
PF1&2 ASSIGN menu
This menu contains items that can be registered to the
PF1/2 menus.
Press the [F4] (PF1&2 ASSIGN) button in the SET UP
menu to display this menu.
For details on registering items in the PF1&2 ASSIGN
menu to the PF1/2 menus, refer to "4-1-3 Registering Items
to the PF1/2 Menus" on page 4-3.
VTR SETUP menu
This menu contains items that specify the initial
operating conditions of the VTR. You can change
these settings directly without registering the items to
the PF1/2 menus.
Press the [F6] (VTR SETUP) button in the SET UP
menu to display this menu.
For details on setting operating conditions of the VTR, refer
to "4-7-1 VTR SETUP Menu" on page 4-40.
The menu configuration of the VTR is shown in the
figure below,
HOME menu
TC menu
PF1 menu
Registration
PF2 menu
CUE menu
SET UP menu
[F4] (PF1&2 ASSIGN) button
[F6] (VTR SETUP) button
Menu configuration
• All items in the HOME, TC, and CUE menus can be
duplicated and registered to the PF1/2 menus.
• Most items in the VTR SETUP menu can be
registered to the PF1/2 menus.
PF1&2
ASSIGN menu
VTR SETUP
menu
4-1
Chapter 4 Menu Settings