Sony DVW-A510 Operation Manual page 154

Digital videocassette player/recorder
Table of Contents

Advertisement

Menu List
Item number
Item
805
AUDIO MONITOR
OUTPUT MIXING
806
LEVEL METER
SCALE
807
AUDIO OUTPUT
PHASE
preset: 80H
808
INTERNAL AUDIO
SIGNAL
GENERATOR
A-32
Appendix
Settable range
Function
add
Specifies the type of audio mixing to be conducted on the
0
[rms]
digital audio signal or Betacam playback analog audio
[1]
average
signal output to the MONITOR OUTPUT connector.
2
0: Simple addition
1: Multiplied average
2: Simple average
Note
When the CUE channel signal (a digital Betacam analog
audio signal) is output to the monitor, signals are mixed by
simple addition.
[0]
[peak 0 dB]
Specifies the mode in which the digital audio level is
1
reference 0 dB
displayed.
0: Displays minus audio levels with the maximum level set
1: Displays plus and minus audio levels with the reference
Note
The cue channel level is always displayed with the
reference level set at 0 dB. In the Betacam playback mode,
all channel levels are displayed with the reference level set
at 0 dB no matter what this setting is.
0
Sets the output timing for the digital audio playback signal
0 (HEX)
(SIF and AES/EBU only). The 80H setting specifies the
I
I
[80]
reference position.
80 (HEX)
A setting lower than 80H advances the output timing, and a
I
I
setting higher than 80H delays the output timing.
FF
FF (HEX)
(80H = 128 samples, or approx. 2.7 ms, with 1 sample =
approx. 20 µs)
[0]
[off]
Specifies the operation of the internal audio test signal
1
silence
generator.
2
1 kHz sine
0: The internal audio test signal generator does not oprate.
1: Silent signal
2: 1 kHz signal output (1 kHz –20 dB FS sine wave is
In modes other than off:
• Press the INPUT SELECT button on the upper control
panel so that it lights up (the VTR enters AUDIO INPUT
SELECT mode).
• When one of the CH1 AUDIO INPUT SELECT buttons
(SIF, AES/EBU L, ANALOG R) is held down for more than
three seconds, the digital audio input signals of all
channels are replaced by the internal audio signal.
at 0 dB.
level set at 0 dB.
supplied to all audio inputs.)

Advertisement

Table of Contents
loading

Table of Contents