Table of Contents
Advertisement
Menu List
Item number
Item
316
CONFIDENCE
PB MODE
317
AUDIO EDIT
MODE
318
EDIT RETRY
319
PREREAD
SELECT
A-18
Appendix
Settable range
Function
SYS 1,SYS 2 ROM
Specifies the confidence playback mode when the [F2]
version 1.30 and higher
(CONFI) button in the HOME menu is set to ON.
0: VTR changes to CONFI playback mode during recording
0
MODE 1 : Rec/Edit
[1]
MODE 2 : Rec/Edit/
1: Same as Mode 1, except VTR changes to the confidence
E.preset
2
MODE 3 : Rec only
2: Confidence control is operative only in crash recording
Note
When previewing during an automatic edit, the VTR
changes to ADVANCE playback mode no matter what this
item is set to.
cut edit
Specifies the type of editing for digital audio signals.
0
[cross fade]
[1]
0: Cut editing (discontinuity in audio signal may result at the
fade in/out
2
1: Cross-fade (see figure below.)
2: Fade-out and fade-in (see figure below.)
Note
The "t" in the figures above is the time set by item 803.
0
off
Set this item when the VTR is used as a recorder during
[1]
[on]
VTR-to-VTR editing. Specifies the action taken when the
recorder fails to synchronize with the player VTR.
0: Editing is not executed and the VTR enters STOP mode.
1: The VTR automatically repeats the editing again (up to
[audio/video]
Specifies PREREAD operations.
[0]
audio only
0: Prereads both audio and video signals.
1
video only
1: Prereads audio signals only.
2
2: Prereads video signals only.
Preread operations are specified and executed by the [F1]
(PRE READ) button in the HOME menu or a 9-pin
REMOTE1-IN connector command.
and editing mode.
playback mode also when EDIT preset is 'ON' during
normal playback.
mode.
join, causing noise.)
IN/OUT
DATA No. 1
IN/OUT
DATA No.2
two times twice).
t
t
Advertisement
Table of Contents
