Table of Contents
Advertisement
Item number
Item
118
KEY INHIBIT
SWITCH
EFFECTIVE AREA
Sub Item
1
REMOTE
SELECT
2
MON/INPUT
SEL
CONTROL
3
PANEL
119
VARIABLE SPEED
LIMIT IN KEY
PANEL CONTROL
CTL LOCK IN
120
VAR/SHTL
DT MODE
121
122
AUTO EE WITH
(DVW-A500/1
ANALOG TAPE
and A500P/1)
(VIDEO ONLY)
Settable range
Function
The enabling or disabling of switches and buttons can be
independently specified through each of the following sub-
items when the [F1] (KEY INH) button on the lower control
panel is set to "on" while in the PANEL SETUP menu.
[0]
Specifies whether the REMOTE1 (9P) and REMOTE2 (50P)
[disable]
1
button on the upper control panel are enabled or not.
enable
0: REMOTE1/REMOTE2 buttons are disabled.
1: REMOTE1/REMOTE2 buttons are enabled.
[disable]
Specifies whether the INPUT/MONITOR SELECT buttons
[0]
enable
on the upper control panel are enabled or not.
1
0: INPUT/MONITOR SELECT buttons are disabled.
1: INPUT/MONITOR SELECT buttons are enabled.
[0]
[disable]
Specifies which switches and buttons on the control panel
1
edit
of this unit and the external control panel connected to this
2
enable
unit are enabled.
0: All switches and buttons are disabled.
1: The switches and buttons related to editing function are
2: All switches and buttons are enabled.
[off –1 to +3 ]
[0]
(
)
Sets the the tape speed range during variable-speed (VAR)
on ( 0 to +1)
1
playback on the control panel of this unit.
0: The range of the tape speed is –1 to +3 times normal
1: The range of the tape speed is 0 to +1 time normal
[0]
[off]
CTL locks the tape transport during variable-speed
1
–1/–0.5/0.5/1.0/2.0
playback or shuttle playback.
0: CTL does not lock.
1: CTL locks the tape transport at speeds of –1, –0.5, 0.5,
[0]
[field]
Sets the DT operation mode.
1
frame (0 to +2)
0: Field playback (Field DT mode).
1: Enters the frame playback mode (frame DT mode) when
[0]
[disable]
As in the case of digital tape insertion (Item 108), the VTR
1
enable
automatically changes to E-E mode from a VTR mode
(F.FWD, REW, STOP, etc) when an analog tape is inserted.
The change to E-E mode is only for video signals.
MUTE mode for audio signals.
0: The unit stays in playback mode when an analog tape is
1: Item 108 is effective even when an analog tape is
For details on item 108, refer to page A-11.
disabled.
speed.
speed.
1.0, and 2.0 times normal speed.
the tape speed is 0 to +2 times normal speed.
inserted.
inserted.
A-13
Appendix
Advertisement
Table of Contents
