Sony DVW-A510 Operation Manual page 162

Menu List
Item number Item
K19 PROCESS
CONTROL
K21
AUDIO INPUT SEL
CH-1
K22 AUDIO INPUT SEL
CH-2
K23 AUDIO INPUT SEL
CH-3
AUDIO INPUT SEL
K24
CH-4
DOLBY NR
K25
(DVW-A500/1 and
A500P/1)
K26 AUDIO EMPHASIS
A-40
Appendix
Settable range Function
remote
0
Selects the method for operating the internal digital video
[setup menu]
[1]
processor.
local
2
0: Select this setting when using the optional BVR-50
1: Select this setting when adjusting the settings of the
2: Select this setting when controlling the internal digital
Note
Changing the PROCESS CONTROL setting during
playback may cause a momentary interruption in the sound
output.
0 analog
Selects the audio input signal for the various channels.
[1] [sif]
0: Audio signal input to the ANALOG AUDIO INPUT
2 AES/EBU
1: Audio signal input to the SERIAL V/A INPUT connector.
0 analog
2: Audio signal input to the AUDIO INPUT (AES/EBU)
[1] [sif]
2 AES/EBU
0 analog
[1] [sif]
2 AES/EBU
0 analog
[1] [sif]
2 AES/EBU
0 off Turns on and off the Dolby NR (noise reduction) C system
[1] [on] which is used for cue audio tracks only when using an
oxide tape. The system automatically turns on when using
a metal tape.
0: Plays back an analog Betacam oxide tape without the
1: Plays back an analog Betacam oxide tape with the
[0] [off]
Set to emphasize to a digital audio signal that has been
1 on converted from an analog audio input signal.
This setting also allows you to emphasize while digitizing a
playback audio signal from a conventional Betacam
cassette.
Remote controller to remotely control the internal digital
video processor.
internal digital video processor through items 715 to 721.
processor from the control panel of the VTR.
connectors.
connectors.
Dolby NR system.
Dolby NR system.