Sony DVW-A510 Operation Manual page 139

Item number Item
310 REC INHIBIT
Items 311 through 315 describe the analog audio edit preset
during editing mentioned on right.
311 ANALOG AUDIO
EDIT PRESET
REPLACE FOR CH
1
312
ANALOG AUDIO
EDIT PRESET
REPLACE FOR CH
2
ANALOG AUDIO
313
EDIT PRESET
REPLACE FOR CH
3
ANALOG AUDIO
314
EDIT PRESET
REPLACE FOR CH
4
315 ANALOG AUDIO
EDIT PRESET
REPLACE FOR
CUE
Settable range Function
Specifies the extent of the record inhibit function.
[0] [all]
1 0 : Recording is disabled.
crash
1 : Normal recording is disabled, but recording in assemble
2
video
3
audio
2 : Recording of video and CTL signal is disabled.
3 : Recording of audio and CTL signal is disabled
Note
The REC INHIBIT indicator on the lower control panel
lights up when the setting is "1" or "2", and flashes when an
operation prohibited by the setting is attempted.
The follwing items specifies the allocation of each channel
for the analog audio preset of the editor or remote
controller when the digital audio signals from the VTR is
edited on an editor (BVE-600, etc.) or remote controller
with digital audio edit preset control functions.
0 no definition Sets the channel-1 edit preset of the VTR to ON or OFF
[1] [analog ch 1] according to the analog audio preset specified on an editor
2 or remote controller.
analog ch 2
3 analog ch 1 + ch 2 0 : Not defined.
1 : As determined by analog channel 1 edit preset.
2 : As determined by analog channel 2 edit preset.
3 :As determined by analog channel 1 or analog channel 2
Sets the channel-2 edit preset of the VTR to ON or OFF
0 no definition
according to the analog audio preset specified on an editor
analog ch 1
1
or remote controller.
[2] [analog ch 2]
0 : Not defined.
3 analog ch 1 + ch 2
1 : As determined by analog channel 1 edit preset.
2 : As determined by analog channel 2 edit preset.
3 : As determined by analog channel 1 or analog channel 2
[0] [no definition] Sets the channel-3 edit preset of the VTR to ON or OFF
1 analog ch 1 according to the analog audio preset specified on an editor
analog ch 2 or remote controller.
2
3 analog ch 1 + ch 2 0 : Not defined.
1 : As determined by analog channel 1 edit preset.
2 : As determined by analog channel 2 edit preset.
3 : As determined by analog channel 1 or analog channel 2
[0] [no definition]
Sets the channel-4 edit preset of the VTR to ON or OFF
analog ch 1 according to the analog audio preset specified on an editor
1
2 analog ch 2 or remote controller.
analog ch 1 + ch 2
3 0 : Not defined.
1 : As determined by analog channel 1 edit preset.
2 : As determined by analog channel 2 edit preset.
3 : As determined by analog channel 1 or analog channel 2
[no definition]
[0]
Sets the analog audio channel (longitudinal) edit preset of
analog ch 1
1
the VTR to ON or OFF according to the analog audio
2 analog ch 2
preset specified on an editor or remote controller.
analog ch 1 + ch 2
3
0 : Not defined.
1 : As determined by analog channel 1 edit preset.
2 : As determined by analog channel 2 edit preset.
3 : As determined by analog channel 1 or analog ch 2
or insert edit mode is possible.
preset.
preset.
preset.
preset.
preset.
A-17
Appendix