Table Of Contents - HP E3491A Installation And Service Manual

Contents
Part 1 Installation
1 Connecting to the HP 16505A Prototype Analyzer
Equipment supplied 4
Installing the software in the HP 16505A Prototype Analyzer 5
Connecting the HP E3491A Pentium Probe to a Power Source 6
To choose a power cord 6
To connect the power cord and turn on the HP E3491A Pentium Probe 7
Connecting the Probe to the Prototype Analyzer 8
Connecting for a point-to-point configuration 9
Connecting to a LAN 10
To set the 10BASE-T configuration switches 12
Setting Up LAN Communication 13
To verify LAN communications 14
Setting Up a Serial Connection 15
To set the serial configuration switches 16
To connect a serial cable 16
To verify serial communications 17
To configure LAN parameters using the built-in terminal interface
2 Connecting to the Target System
Connectors provided 22
To test the HP E3491A Pentium Probe 23
To connect to a target system via the Intel defined debug port 23
To connect to a target system via the HP E2457A Pentium Preprocessor 24
18
v