Kyocera FS-C5025N Supplementary Manual page 93

SNMP (Simple Network Management Protocol)
5. Complete each field. The fields are described below
SNMPv3
User Name
Authentication Protocol
Authentication Password
Privacy Password
SNMPv1/v2c
Read Community
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\SNMP.htm
Figure 1. COMMAND CENTER SNMP Settings Page
Enables (On) or disables (Off) SNMPv3. The SNMPv3 protocol provides security
using DES encryption and MD5/SHA authentication. When SNMPv3 is on, set
SNMPv1/v2c to Read Only or Off.
Enter the username used by SNMPv3. Maximum of 32 single-byte characters.
You can choose between MD5 and SHA.
Enter the password for authentication. Enter between 8 and 32 single-byte
characters.
Enter the password for encryption. Enter between 8 and 32 single-byte
characters.
SNMPv1/v2c can be set to enabled (On), Read Only, or disabled (Off). Turn
SNMPv3 off if this setting is set to On.
This is used to read device information.The default read community string is
2/3 ページ
2006/05/26