Kyocera FS-C5025N Supplementary Manual page 58

Unix Printing
This section explains printing via ftp. For additional details on ftp commands, please refer to your UNIX manual.
Printing via ftp
1. Login to the IB-23.
IB-23 support for anonymous ftp allows logging in without entering a user name or password. The following
example uses 192.168.30.161 as the IB-23 IP address.
#ftp 192.168.30.161
Connected to 192.168.30.161
220 IB-23 Ver1.0.0 FTP Server.
User (192.168.110.40:(none)):
331 Password required.
Password:
230 User Logged in.
ftp>
2. Select the IB-23 logical directory.
Always use lp1 as the logical directory unless printing Kanji text. The following example selects lp1 as the
logical directory, then confirms the current directory.
ftp>cd /lp1
250 Command Ok.
ftp>pwd
257 "/lp1" is current directory.
ftp>
3. Select ASCII or BINARY transfer mode.
BINARY mode should be used to transfer print files generated by a printer driver. ASCII mode is used to
transfer text based files and automatically converts LF (linefeed) codes to CR+LF (carriage return, linefeed)
codes. If no transfer mode is specified, then ASCII mode is used as the default.
The following example sets BINARY as the transfer mode and confirms the current transfer mode.
ftp>type binary
200 Type set to I.
ftp>type
Using binary mode to transfer files.
ftp>
4. Transfer the file using the put command.
The following example illustrates the transfer of the finance.prn file to the IB-23.
ftp>put finance.prn
200 PORT command Ok.
150 Open data connection.
226 Data connection closed.
ftp: 122285 bytes sent in 0.07 Seconds 1746.93 Kbytes/sec.
ftp>
It is also possible to enter the full path to the file name and/or explicitly specify the logical directory (/lp1) as
in the following put examples.
ftp>put /users/export/finance.prn
ftp>put finance.prn /lp1
ftp>put /users/export/finance.prn /lp1
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\unix.htm
7/8 ページ
2006/05/26