Kyocera FS-C5025N Supplementary Manual page 56

Unix Printing
BSD UNIX Setup
The instructions below are for SunOS 4.1.3. The commands and paths listed in the following procedures may vary slightly
depending upon the OS version.
Configuring the Print System
1. Login as root.
# login root
2. Register the IB-23 in the /etc/printcap file.
The following example uses sales820ptr as the print server name and sales820q as the print queue name
(spool directory). The etc/printcap file entries are followed by explanations of the parameters in italics:
sales820ptr:\
Print server name
:lp=:rm=sales820ptr:rp=lp1:\
lp= print device; this is blank when a remote printer is specified.
rm= remote printer host name as entered in the /etc/hosts file.
rp= remote printer; use the IB-23 logical port name of lp1.
:sd=/usr/spool/sales820q:\
sd= spool directory and path
:lf=/usr/spool/sales820q/sales820q_errs:
lf= error log file and path
3. Create the Error Log File and Spool Directory as specified in the etc/printcap file.
The following example uses sales820q as the spool directory and sales820q_errs as the error log file
name.
# mkdir /usr/spool/sales820q
creates the spool directory
# touch /usr/spool/sales820q/sales820q_errs
creates the error log file
# chown -R daemon /usr/spool/sales820q
changes the owner to daemon
# chgrp -R daemon /usr/spool/sales820q
changes the group to daemon
4. Check the lpd (printer demon) function.
# ps aux | grep lpd
If lpd is not functioning, use the following command when logged in as root.
# /usr/lib/lpd&
5. Validate the new print queue.
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\unix.htm
5/8 ページ
2006/05/26