Kyocera FS-C5025N Supplementary Manual page 77

Using a Web Browser to Manage the IB-23
This table gives an overview of the items displayed on this page.
Item
Host Name
IP Address
Subnet Mask
Default Gateway
DHCP, BOOTP, RARP, ARP/PING The IB-23's IP address can be automatically assigned by DHCP, BOOTP, RARP,
Bonjour
Bonjour Name
ThinPrint
ThinPrint Port Number
DNS Server (Primary, Secondary)
Domain Name
WINS Server (Primary, Secondary) For designating the primary and secondary IP addresses of the WINS server.
Scope ID
FTP Status Check
IPv6
5-2. Protocols > TCP/IP > IP Filters
IP Filters can be used to designate what hosts or host networks can use the IB-23. For entry, designate the host IP
address. You can designate up to 16 access list entries.
If there are no entries, access is accepted from all hosts. To enable access from all hosts on network 192, for example,
enter 192.0.0.0 as the start address and 192.255.255.255 as the end address. To allow only the host 192.168.1.2, enter
192.168.1.2 for both the start and end address.
Apply a check mark to protocols to select them.
Protocols left unselected can be used for access from all hosts. To deny access from all hosts, enter 0.0.0.0 as the start
and end address and select the protocols.
5-3. Protocols > TCP/IP > Logical Printers
The IB-23 can be used as a virtual printer that adds or replaces strings (commands) at the start or end of job data. You
can configure up to four logical printers.
Logical printers use FTP, LPR, or IPP as the communication protocol. Printouts to nonexistent ports are all sent to Logical
Printer 1.
Item
TCP/IP Port Number
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\card_homepag...
Description
For designating the name of IB-23.
For assigning the IB-23's IP address. Example: 192.168.110.171
For designating the subnet mask. If the IP address entered manually starts with 192
to 254, use 255.255.255.0 as the subnet mask.
For designating the IP address of the default gateway.
and ARP/PING.
Bonjour can be switched on and off. Activate Bonjour if you want to be able to add
printers through Print Center in Mac OS X. Printers must support KPDL for printing.
For designating a name to be used with Bonjour.
Enables (On) or disables (Off) ThinPrint. ThinPrint is a technology that distributes
the network load due to printing through compression and bandwidth control of the
print data. To use ThinPrint, .printServerEngine is required on the server,
and .printClient is required on the client (printer). When the ThinPrint feature of the
IB-23 is turned on, the IB-23 operates as a ThinPrint client.
Specifies the port that is used for communication with .printServerEngine. The
default value is 4000.
For designating the primary and secondary IP addresses of the DNS (Domain
Name System) server.
For designating the DNS name of the domain to which the IB-23 belongs. Do not
designate the host name.
For determining the scope of IP addresses the Windows server can assign or lease.
Checking the status of the FTP connection that can be turned on and off.
Switches IPv6 on and off. When this setting is on, the IB-23 supports IPv6. In order
to use IPv6, however, all of the devices on a network need to support IPv6.
Description
You can designate the port number for logical printers just as you can designate the
11/19 ページ
2006/05/26