Kyocera FS-C5025N Supplementary Manual page 79

Using a Web Browser to Manage the IB-23
Item
Print Server Mode
Remote Printer Mode
5-6. Protocols > AppleTalk
This print system supports Mac OS. (See 1-1.
To print in AppleTalk networks, activate AppleTalk protocol.
Item
AppleTalk
Printer Name
Zone Name
5-7. Protocols > NetBEUI/NetBIOS
Print systems connected via NetBEUI are registered in Windows in My Network.
Item
NetBEUI Protocol
NetBIOS over TCP/IP
Browse Master
Printer Name
Workgroup
Comment
5-8. Management/E-mail > SMTP > General
The IB-23 can notify registered users by e-mail when the toner is running out, or send other information. SMTP is used for
this feature. You must configure the SMTP protocol settings before the IB-23 can connect to an SMTP server.
Item
SMTP Protocol
SMTP Port Number
SMTP Server Name
Authentication Protocol
Authenticate as
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\card_homepag...
Description
Up to eight file servers can be registered. If there are nine or more file servers,
register the priority file server names.If none are registered, up to eight servers are
automatically connected at startup. However, print server names in the file server
must match IB-23 print server names.
Up to eight print servers can be registered. If there are nine or more print servers,
register the priority print server names. If none are registered, up to eight servers
are automatically connected at startup. However, printer names (printer port
names) in the print server must match IB-23 remote printer names (printer port
names). Even if registered file servers are started after the IB-23, the IB-23
regularly conducts polling so they will be automatically connected.
Compatible Systems) and is compatible with LaserWriter driver version 8.x.
Description
Choose whether AppleTalk protocol is enabled (On) or disabled (Off).
Identifies printers in the AppleTalk network.
Identifies the AppleTalk zone (network). An asterisk (*) here indicates the default
zone.
Description
Choose whether NetBEUI protocol is enabled (On) or disabled (Off).
Enables (On) or disables (Off) NetBIOS over TCP/IP. When this setting is on,
NetBIOS can be used in a TCP/IP network environment.
When this option is selected, the print system changes to browse master, and a
workgroup is created in My Network. When the option is not selected, the print
system is added to an existing workgroup.
The printer and host names on the TCP/IP General tab (Protocols > TCP/IP >
General) are interrelated. If you want to change the NetBEUI printer name, change
the TCP/IP host name as well.
The printing workgroup is a workgroup shown in Entire Network in My Network. The
default workgroup name is "KM-NetPrinters."
You can enter a comment as desired. This field can also be left blank.
Description
Choose whether SMTP protocol is used (On) or not (Off).
For designating the SMTP port number. Use port number 25. Click the Test button
to check the connection.
Enter the SMTP server name or IP address.
Choose whether SNMTP authentication protocol is used (On) or not (Off).
Select one of the POP3 users (1-3) for SMTP authentication using the selected
13/19 ページ
2006/05/26