Kyocera FS-C5025N Supplementary Manual page 81

Using a Web Browser to Manage the IB-23
5-11. Management/E-mail> POP3 > User (1-3)
For configuring user and password settings to print from e-mail. You can enter up to 3 user accounts. Additionally, you
can restrict printing of received e-mail messages depending on the file size and the content of Subject, To, Cc, and From.
It is also possible to print file attachments.
Item
User 1-3
E-mail Address
POP3 Server Name
Test
POP3 Port Number
Login User Name
Login Password
Use APOP
Delete e-mail after retrieval
E-mail Size Limit
Filter Setting
Cover Page
5-12. Management/E-mail > SNMP > General
The SNMP protocol is used to transfer administrative information across a network. You can choose between
SNMPv1/v2c or SNMPv3.
Utilities that use a management information base (MIB) may not operate if SNMPv3 is turned on.In this situation,
turn SNMPv3 off and set SNMPv1/v2c to On or Read Only.
Item
SNMPv3
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\card_homepag...
Description
Choose On or Off in this setting to enable or disable e-mail deliveries to that user.
Enter the e-mail addresses of users 1-3.
Designate the POP3 server name (up to 78 characters). Enter the domain name or
IP address.
Click the Test button to confirm that the user accounts are correctly configured.
For designating the POP3 port number. Use port number 110.
Designate the user account login name (up to 64 characters).
Designate the password for this account (up to 31 characters).
Choose whether APOP protocol is used (On) or not (Off). Enable this setting (On)
when connecting to mail servers that support APOP.
Choose whether or not to delete messages from the server after they are received.
For designating the maximum size of messages that can be received. Messages
over the designated size are not received. Even if you have chosen to delete
messages from the server, these unreceived messages are not deleted. If you
prefer not to restrict reception, designate 0 as the size.
You can designate strings to filter messages (up to 255 characters). Create filter
strings using the following prefixes.
S: Filter by Subject
T: Filter by To
C: Filter by Cc
F: Filter by From
To filter by any of several conditions (OR), separate strings with "|". To filter by
several conditions (AND), all of which must be met, separate strings with "&". For
example, to print only messages with a subject of "Service" or "Technical", use
"S:Service | S:Technical".
When you have set up printing from e-mail, designate whether or not to print the
message body as well. Choose On to add a cover page when printing messages. If
there is text in the message body, it will be printed as the cover page. Choose Off
to print file attachments only. If there is no file attachment, nothing is printed.
Description
Enables (On) or disables (Off) SNMPv3. The SNMPv3 protocol provides security
using DES encryption and MD5/SHA authentication. When SNMPv3 is on, set
SNMPv1/v2c to Read Only or Off.
15/19 ページ
2006/05/26