Selecting And Creating Custom Colors (Color Models Only) - Kyocera KM-C830D User Manual

1
2
3
4
5
6
7
User Guide
Angle
Click the angle button
anywhere in the preview area. Click and hold as you move the mouse, rotating the
watermark image to as you want it to appear on the printed page
The method of rotation is determined by selecting or clearing the Rotate around
center check box at the far right of the dialog box. Select the check box to rotate text
around its center; clear the check box to rotate text around its left end. You must
select User defined in both Angle and Position to enable the Rotate around
center option.
The following options provide additional means for positioning watermark text:
Diagonal [default]: Places the watermark at the default angle of 52 degrees.
User defined: Select to change the angle from the default value. Enter the number
for the angle you want. An angle is measured in degrees, ranging from 0 to 360.

Selecting and Creating Custom Colors (Color Models Only)

To use a predefined color for the watermark text, select one from the Color list.
For more colors, select Custom at the bottom of the list. Click the [...] button to open
the Color dialog box.
Click one of the Basic colors and click OK; or click Define Custom Colors to open
the color spectrum panel.
In the color spectrum, click and drag the pointer to different areas of the spectrum to
adjust the hue and saturation levels. The corresponding numeric values appear in
the Hue, Sat, and RGB (Red, Green, Blue) text boxes. Click and drag the slider at
the right side of the color spectrum to adjust the luminosity (relative lightness or
darkness) of a color. The corresponding numeric value appears in the Lum and RGB
text boxes.
You can also create a specific color by typing numbers in the Hue, Sat, Lum or RGB
text boxes.
Click Add to Custom Colors to save the new color to the Custom colors at the
bottom left of the Color dialog box.
Click OK to save any new custom colors and close the Color dialog box. To close
the dialog box without saving any new colors, click Cancel.
to change the angle of the watermark. Position the cursor
Advanced
1
2
3
4
5
6
7
10-6