Kyocera KM-C830D User Manual page 82

Job
1
2
3
4
5
6
8-3
The features are listed below:
• Jobs are managed internally with job IDs and printed after saving by an
application (KM-NETJob Manager).
• Barcode print output is supported and facilitates future printing with an optional
barcode reader.
• Both types of jobs are saved on the hard disk, up to the user-defined capacity.
However, temporary jobs are automatically deleted if the defined capacity is
reached. Permanent jobs remain saved until removed by the user.
Print and Save Temporary and Permanent Jobs
Note: Check that your printing system has an optional hard disk installed.
From the application's Print dialog box, open the Properties. (Select Print from the
File menu).
Open the Properties dialog box, and click the Job tab.
Select the Job Storage (e-MPS) check box.
Select Temporary or Permanent.
When printing a job with a job ID barcode, click Options to open the Barcode
Options dialog box and make the appropriate settings.
For further details, refer to
Click OK on Barcode Options and then in the Job tab to return to the Print dialog
box. While printing, the job will be simultaneously saved on the hard disk as either a
temporary or permanent job.
Note: To reprint temporary or permanent jobs, the dedicated KM-NET for Clients
Job Manager utility is required.
Use KM-NET for Clients to Print Saved Jobs Again
To print out jobs, the KM-NET for Clients utility must first be installed on your
computer. The utility is located on the supplied Kyocera Software Library CD-ROM.
Print a Barcode on a Print Job on page 8-6.
KX Driver
1
2
3
4
5
6