Kyocera KM-C830D User Manual page 32

Printing Basics
2
3
3-5
Click the Multiple pages per sheet check box.
Specify the number of source pages in the Pages per sheet list. You can select the
horizontal direction for the page layout using Layout.
If you select six pages per sheet, then six pages are printed on a single sheet as
shown in the dialog box in the example above. If Auto is selected for layout, pages
are arranged from the top left corner to the bottom right corner.
Selecting the Print Borders check box displays and prints the page borders of each
page.
Note: When KPDL is set for the PDL, printing may be affected in some applications.
Change the setting to PCL XL or PCL 5e, or set Passthrough mode in the KPDL
mode settings to Off. For further details on changing the PDL, refer to Page
Description Language (PDL) on page 2-6.
Media Types
The printing system automatically selects the paper size specified in the Page Sizes
setting in the Basic tab by default when you are printing on regular paper. However,
the printing system supports a wide variety of printing media depending on your
printing system model.
You can specify the media type in the Media type setting for auto media selection
selection when using non-standard types of printing media, such as recycled paper,
labels, or transparencies. You can also specify the finishing settings for best results.
Automatic selection of media types can be disabled in the PCL XL settings dialog
box. For further details, refer to
Labels, transparencies, and envelopes must be printed using the MP tray. Ensure
the paper is properly loaded by following the instructions outlined in the supplied
printing system's Operation Guide.
Page Description Language (PDL)
2
3
on page 2-6.
KX Driver