Kyocera KM-C830D User Manual page 33

1
2
3
4
5
User Guide
Note: The default setting is for Source and Media type to be separate, but it is
possible to combine them using a setting in Compatibility Settings. If they are
combined, the Media type list is not available. To change this setting, open Printer
Properties from the Microsoft Windows Printer and Faxes window, go to Device
settings and then Compatibility Settings, and then uncheck Combine source and
media type lists.
When paper is properly loaded in the paper cassette, the printing system can
automatically detect the paper size. However, it is necessary to use the operation
panel on the printing system to assign the media type of the paper cassette so that
the printing system can recognize it. The steps to specify the media settings are
listed below.
Load the paper in a paper cassette or the MP tray.
Note: Use the MP tray in cassette mode (the default). For further details on MP tray
modes, refer to the printing system's Operation Guide.
Specify the media type at the operation panel on the printing system.
Open the Properties dialog box.
Select the document paper size from the Print Size list.
From the Media type list, select the type of media for printing, then click OK.
Options available in the Media type list are as follows.
Media Type
2
Plain 64 to 90 g/m
Transparency
Usable Paper Cassettes
All
Multi-purpose tray (MP tray)
Printing Basics
1
2
3
4
5
3-6