Kyocera KM-C830D User Manual page 98

Job
5
6
7
8
9
10
11
12
13
14
15
8-19
Press the ENTER key, the user name displays with a blinking question mark [ ? ].
If the user name is correct, press the ENTER key. Otherwise, press the
until the correct name is displayed.
The job name is displayed with a blinking question mark [ ? ]. Press the ENTER
The user name displayed is specified following the instructions in
page 2-5. If this is the correct job for printing, press the ENTER key.
Otherwise, press the
ENTER key.
Enter the four-digit access code created in
Press the or key to increase or decrease the number.
Press the or key to move the cursor right and left.
Press the ENTER key. Use the
printing.
Press the ENTER key to start printing.
After printing, the job will be automatically deleted from the hard disk. To delete the
job without printing it, follow the same procedure as in
page 8-17.
or key until the correct job name appears, then press the
Private Print
or key to specify the number of copies for
or
Identification
on page 8-18.
Deleting Quick Copy Jobs
KX Driver
5
key
6
key.7
on
8
9
10
11
12
13
14
on
15