Installation
Connections
1-3
If you are connecting your device to your computer with a parallel cable, select LPT1:
from Use the following port:, then click Next, and then proceed to
page 1-7.
If the port is not in the list, select Create a new port, select the port type from the
menu, and click Next.
Instructions for creating a new USB port are below. To create a network port, see
Create a New Network Port
USB Port
1
If there are no USB ports listed under Use the following port, from the Create a
new port type list, select KM USB Port:, then click Next.
on page 1-5.
step 6
on
5
6
7
1
KX Driver