Punch Settings; Assigning Virtual Mailboxes - Kyocera KM-C830D User Manual

User Guide
select this option from operation panel. See
more information.

Punch Settings

When you select the check box for a finishing device shown in blue in the Device
options list, such as Finisher or Multi-Finisher, the Punch Unit Settings dialog box
appears. If the device listing is already enabled, double-click the option to display the
Punch Unit Settings dialog box.
Select 2 Hole, 2 & 3 Hole, or 2 & 4 Hole punch option depending on the optional
Punch Unit attached to your finisher to enable hole punching.

Assigning Virtual Mailboxes

If you enable the Hard disk check box, the Hard Disk Settings dialog box appears
and virtual mailboxes can be created. For further details, see
page 8-8.
Note: An installed hard disk supports the following options: Quick Copy, Proof and
Hold, Private Print, Job Storage, Virtual Mailbox, Temporary Storage, and
Permanent Storage.
Printer Properties
Auto Configuration on page 2-11 for
Virtual Mailbox
4
on
2-3