Table of Contents
Advertisement
Main code 50
50-1
Purpose
Adjustment
Function (Content)
Used to adjust the copy image position and the
void area (image loss) on print paper in the copy
mode. (A similar adjustment can be made with
SIM 50-2 (simple method).)
Section
Item
Picture quality
Operation/Procedure Perform the copy lead edge adjustment.
1) The current set value is highlighted on the
right of each item. In this screen, be sure to
select "1: COPY START." (Set value: 1)
2) Enter the correction value with 10 digit key
pad.
Press P to store the set value.
3) Press START to start copying and store the
set value. (Display value: 1)
4) Set the scan magnification ratio. (Set value: 3)
SIMULATION 50-1
LEAD EDGE ADJUSTMENT. SELECT 0-9, AND PRESS START.
0. TRAY SELECT
1. COPY START
1
100
2. MAGNIFICATION
3. RRCA
50
4. RRCB
6. IMAGE LOSS(LEAD)
15
50
8. DENA
9. FR_VOID
Select other than 0 - 2,
and press [START] key.
SIMULATION 50-1
LEAD EDGE ADJUSTMENT. INPUT VALUE 0-99, AND PRESS START.
3. RRCA
Select 1, and
Press [START] key.
press [START] key.
SIMULATION 50-1
LEAD EDGE ADJUSTMENT. NOW COPYING.
Select 0, and
press [START] key.
SIMULATION 50-1
LEAD EDGE ADJUSTMENT. SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
Select 2, and
press [START] key.
SIMULATION 50-1
LEAD EDGE ADJUSTMENT.
(MAGNIFICATION)
INPUT 25-400(%)
50
5. DENB
30
7. IMAGE LOSS(SIDE)
20
30
Press [CUSTOM SETTING] key.
50
Press [CUSTOM SETTING] key.
Or copying is terminated.
Press [START] key or
press [CUSTOME SETTING] key.
1
Press [START] key or
press [CUSTOME SETTING] key.
100
AR-M350 SIMULATIONS 10-48
<List of set values 1>
0 TRAY SELECT
1 COPY START
2 MAGNIFICATION
3 RRCA
4 RRCB
5 DENB
6 IMAGE
LOSS(LEAD)
7 IMAGE
LOSS(SIDE)
8 DENA
9 FR_VOIDFR
<List of display values 1>
Normal display
ERROR display
2
<List of set values 2>
1
TRAY1
2
TRAY2
3
TRAY3
4
TRAY4
5
Manual feed
<List of set values 3>
Set range
25 - 400%
Default Set range
Paper feed tray selection
Copy start (Initial value)
Print magnification ratio
setup
Document scan start
50
position adjustment
Resist roller clutch ON
50
timing adjustment value
Rear edge void quantity
35
adjustment value
Lead edge image loss
15
quantity set value
Side image loss quantity
20
set value
Lead edge void quantity set
35
value
Void quantity adjustment
35
value
NOW COPYING
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
-
1 ~ 5
-
-
25 ~ 400
-
0 ~ 99
0 ~ 99
0 ~ 99
0 ~ 99
0 ~ 99
0 ~ 99
0 ~ 99
Advertisement
Table of Contents
