Sharp AR-M350U Service Manual page 150

Code
Main Sub
50 1 Used to adjust the document scan position, the image print
position, and the void area (image loss).(A similar adjustment
can be made with SIM 50-2 (simple method).)
2 Used to adjust the document scan position, the image print
position, and the void area (image loss).(This simulation allows
simple procedure of the similar adjustment to SIM 50-1.)
6 Document scan position adjustment. (DSPF)
7 Document scan position adjustment (Simple method) (DSPF)
10 Used to adjust the print image center position.
(Adjusted for each paper feed section.)
12 Used to adjust the reading image center position.
(Adjusted for each document mode.)
51 2 Used to adjust the contact pressure of paper on the resist roller
in each section (machine paper feed, duplex paper feed, SPF
paper feed). (This adjustment is required when the print image
position varies or when paper jam occurs frequently.)
53 6 Used to adjust the DSPF width detection level.
7 Used to enter the adjustment value of SPF width detection.
60 1 Used to check the ICU (DRAM) operation (read/write).
(SIMM memory, Onboard memory)
61 1 Used to check the operations of the LSU unit.
2 Used to adjust laser power (absolute value) in the copy mode.
3 Used to adjust laser power
(absolute value) in the FAX reception mode.
(Only when FAX is installed.)
4 Used to adjust laser power
(absolute value) in the printer mode.
62 2 Used to check the hard disk operation (read/write).
(Only for the model with the hard disk) (Partial check)
3 Used to check the hard disk operation (read/write).
(Only for the model with the hard disk) (All area check)
63 1 Used to check the shading correction result.
(The shading correction data are displayed.)
2 Used to execute shading.
7 Used to adjust the white plate scan start position in shading
white correction.
64 1 Used to check the operations of the printer section
(self printing). (The print pattern, paper feed mode, print mode,
print quantity, density can be changed optionally.)
65 1 Used to adjust the touch panel (LCD display section) detecting
position.
2 Used to check the result of the touch panel
(LCD display section) detecting position adjustment.
(The coordinates are displayed.)
Function (Content)
AR-M350 SIMULATIONS 10-6
Purpose
Adjustment
Adjustment
Adjustment
Adjustment
Adjustment Image process (ICU)
Adjustment Image process (ICU)
Adjustment Paper transport
(paper exit,
switchback, transport)
Adjustment
Adjustment, setup, SPF/ADF/RADF/UDH Operation
operation data output,
check (display, print)
Operation test, check Image process (ICU)
Operation test, check
Adjustment
Adjustment
Adjustment
Operation test, check Memory
Operation test, check Memory
Adjustment, setup, Scanner (exposure)
operation data output,
check (display, print)
Adjustment, setup, Scanner (exposure)
operation data output,
check (display, print)
Adjustment Scanner (exposure)
Operation test, check Printer
Adjustment Operation
(display, operation)
Adjustment, setup, Operation
operation data output, (display, operation)
check (display, print)
Section Item
Picture Picture
quality position
Picture Picture
quality position
Picture
quality
Picture
quality
Picture Picture
quality position
Picture Picture
quality position
Operation
Operation
Operation
Operation
Operation
Operation
Operation
Operation
Operation
Operation
Operation
Operation
Operation